Home > Products > Software > SMARTS
 
  Standard Indicators   Industrial Scales
  Programmable Indicators   Balances
  Custom Indicators   Consumer Scales
  Board Level Products   Check Weigher
  Data Logging System   Metal Detector
  Software   Load Cells
 
    SMARTS
    Active X
    VBcal
 
 
SMARTS - Sequence Macro Application Relative Task Software
Solve your application needs using SMARTS. This powerful programming language allows you to take control of the VC-505-S and most of our custom products. Download a custom program below, use it as is or customize it for your application. Program using floating point math operations, case switch elements, and conditional logic.
 
DOWNLOAD
 
The files below requires Acrobat Reader for viewing. Click here to get your FREE copy.
 
Vmterm (2.80MB executable file)
Use this to download SMARTS programs from your computer into your VC-505-S or to transfer your own programs to the instrument.
SMARTS Programming Manual (297KB pdf format)
Check Weigher
This instrument has been programmed to provide check weighing within tolerances selected via bar-code input, accept and out of tolerance outputs and computer logging of transactions.
 
• Custom Check Weigher Manual (122KB pdf format)
• Custom Check Weigher Program (3KB text file)
Axle Weighing System
This unit has been programmed to weigh and record individual axle weights and provide a total vehicle weight.
 
• Axle Weighing System Manual (34KB pdf format)
• Axle Weighing System Program (3KB text file)
Six Ingredient Batch Controller
This is a six ingredient dual speed batch controller with twenty formulas.
 
• Six Ingredient Batch Controller Manual (46KB pdf format)
• Six Ingredient Batch Controller Program (10KB text file)
Custom Counting Scale
This instrument has been programmed to perform custom parts counting.
 
• Custom Counting Scale Manual (39KB pdf format)
• Custom Counting Scale Program (5KB text file)
Loss-in-Weight Dual Speed Controller
This instrument has been programmed to provide a dual speed discharge feed from a hopper with vibrator, impactor, charge valve control and product flow detection.
 
• Dual Speed Controller Instructions (9KB pdf format)
• Dual Speed Controller Program (6KB text file)
Five Preset Pump Control
This instrument has been programmed to provide five preset values for a sequential operation with product flow verification.
 
• Five Preset Pump Control Instructions (6KB pdf format)
• Five Preset Pump Control Program (5KB text file)
Flip/Flop Filler
These instruments have been programmed for continuos filling alternating between two scales. The instrumentation used is a standard VMC-505-S controller. Make sure to download both the master and slave programs.
 
• Flip/Flop Filler Manual (36KB pdf format)
• Flip/Flop Filler Master Program (6xKB text file)
• Flip/Flop Filler Slave Program (5KB text file)
Linked Batch Controller
This system has been programmed to provide batch control for three products sequentially filled into two vessels. There are two MC controllers communicating serially with each other and a computer. The target values will be acquired from the computer at the beginning of each batch.
 
• Linked Batch Controller Manual (48KB pdf format)
• Linked Batch Controller Program (7KB text file)
Net Weight Cut Off Controller
This system is a single setpoint net weight filler. The instrumentation used is a standard VC-505-S.
 
• Net Weight Cut Off Controller Manual (38KB pdf format)
• Net Weight Cut Off Controller Program (7KB text file)
Bagging Machine Controller
The VMC generic packaging controller is programmed to provide the necessary signals to control a fill by weight packaging system. Control can be totally tailored using the SMARTS language The instrumentation used is a standard VC-505-S.
 
• Bagging Machine Controller Manual (51KB pdf format)
• Bagging Machine Controller Program (8KB text file)
 
       
     
ABOUT US  |  PRODUCTS  |  CUSTOMIZED PROJECTS  |  NEWS  |  SUPPORT  |  CONTACT US
Copyright 2006 Virtual Measurements & Control, Inc. All rights reserved.