Home > Products > Board Level Products > Expanded I/O Card
 
  Standard Indicators   Industrial Scales
  Programmable Indicators   Balances
  Custom Indicators   Consumer Scales
  Board Level Products   Check Weigher
  Data Logging System   Metal Detector
  Software   Load Cells
 
    VC 511
    PC 104 Field Bus Module
    PC 104-A0-001 Analog Output Module
    Expanded I/O Card
    TCP/IP Ethernet Card
 
 
Expanded I/O Card
The expanded I/O card adds 32 TTL I/O to the VC505 MC modules. The card is organized as four groups of 8 bits each.

The expanded I/O card can directly drive OPTO 22 solid state relay racks, or other high current requirement loads. Standard connectors and pinouts simplify system wiring. Direct cabling to OPTO 22 racks with up to 24 modules (PB24) is provided by the expanded I/O card 50-pin connector. The remaining 8 TTL lines are available on a separate 20-pin connector.

Note: Special Firmware is required for application with Expanded I/O card.
 
 
       
     
ABOUT US  |  PRODUCTS  |  CUSTOMIZED PROJECTS  |  NEWS  |  SUPPORT  |  CONTACT US
Copyright 2006 Virtual Measurements & Control, Inc. All rights reserved.