Home > Products > Custom Indicators
 
  Standard Indicators   Industrial Scales
  Programmable Indicators   Balances
  Custom Indicators   Consumer Scales
  Board Level Products   Check Weigher
  Data Logging System   Metal Detector
  Software   Load Cells
 
    Batch Controller
    Check Weigher
    Net Weight Filler
    Other Custom Products
 
 
VC 505 Custom Indicator
VMC's custom products are designed using the PC-104 stackable embedded PC architecture, our SMARTS programming language, and custom firmware. With over 250 manufacturers of PC-104 board level products, ranging from global positioning systems to industrial X86 single board computers, this makes our products some of the most expandable and powerful controllers on the market. Our SMARTS programming language allows for fast and easy end-user custom programming. Virtual Measurements & Control can offer virtually unlimited possibilities to meet you custom product needs. In addition, our custom products can be used in conjunction with our ActiveX control to communicate with, download, and upload from your PC. Our custom products can be made to interface with many different printers and other output devices.
 
Batch Controller
 
DOWNLOAD
 
The file below requires Acrobat Reader for viewing. Click here to get your FREE copy.
 
Batch Controller Manual
(46KB pdf format)
 
SPECIFICATIONS
 
1 High-resolution LCD (64 x 240) Graphic 1.25" x 5" display with 0.8" digits and 60 characters of text
2 17 button membrane keypad with tactile keys
3 Display Resolution: Selectable (1 in 10,000 NTEP)
4 Selectable low pass filter and adjustable averaging
5 RFI/EMI protection
6 Twelve ingredient single feed control with pre-act (120VAC or 3-32VDC solid state relay output)
7 Dual speed fill is available
8 Twenty formulas, keyboard selected from memory
9 Displays ingredient, formula number and net weight
10 Auto jog and tolerance check
11 Report: Time/date, net weight, and batch total
12 Operator controls: manual on/off/auto switch, start/stop pushbuttons, hold/run switch, tolerance accept pushbutton, manual discharge and feed selector, 12 position rotary switch for manual feed
13 Nema 12 (10" x 12" x 5") mild steel enclosure (stainless or fiberglass enclosures available)

Check Weigher
 
DOWNLOAD
 
The file below requires Acrobat Reader for viewing. Click here to get your FREE copy.
 
Check Weigher Manual
(122KB pdf format)
 
SPECIFICATIONS
 
1 High-resolution LCD (64 x 240) Graphic 1.25" x 5" display with 0.8" digits and 60 characters of text
2 17 button membrane keypad with tactile keys
3 Display Resolution: Selectable (1 in 10,000 NTEP)
4 Selectable low pass filter and adjustable averaging
5 RFI/EMI protection
6 Three zone (under/OK/over)
7 Store 10 target weights
8 Reject circuit and photo eye input to signal item exiting conveyor
9 Auto Print
10 Accumulations by zone, count, total weight, and average weight
11 Time/date
12 Nema 12 (8" x 10" x 4") mild steel enclosure (stainless and fiberglass enclosures available)

Net Weight Filler
 
DOWNLOAD
 
The file below requires Acrobat Reader for viewing. Click here to get your FREE copy.
 
Net Weight Filler Manual
(38KB pdf format)
 
SPECIFICATIONS
 
1 High-resolution LCD (64 x 240) Graphic 1.25" x 5" display with 0.8" digits and 60 characters of text
2 17 button membrane keypad with tactile keys
3 Display Resolution: Selectable (1 in 10,000 NTEP)
4 Selectable low pass filter and adjustable averaging
5 RFI/EMI protection
6 Single ingredient feed with fast and slow control (120VAC or 3-32VDC solid state relay output)
7 Discharge Output control
8 Auto Preact Adjustment
9 Auto Print
10 Start/stop controls with auto tare
11 Nema 12 (8" x 10" x 4") mild steel enclosure (stainless and fiberglass enclosures available)

Other Custom Products
VMC's custom products and systems are designed from the ground up to meet our customer's specifications. Whenever possible, Virtual Measurements & Control uses its large library of preexisting custom software to adapt our standard products to your application. When necessary, Virtual Measurements & Control will design totally new hardware and software to get the job done. If you feel that you have a need for a custom product that is not listed on the previous pages, please contact us for a quote.

Please see our SMARTS page for custom programs that may be used with our 505S and custom products.

Contact us, we do CUSTOM orders!
 
DOWNLOAD
 
The file below requires Acrobat Reader for viewing. Click here to get your FREE copy.
 
Custom Indicator Brochure (515KB pdf format)
 
       
     
ABOUT US  |  PRODUCTS  |  CUSTOMIZED PROJECTS  |  NEWS  |  SUPPORT  |  CONTACT US
Copyright © 2006 Virtual Measurements & Control, Inc. All rights reserved.